Step 1 – Poorboys white diamond glaze

After fully washing and claying vehicle, use the supplied Meguiars microfibre applicator pad work on one panel at a time using 3 – 4 skittle sized drops of product and apply thinly and work into the paintwork to produce a film, leave for around 10 minutes or once hazed over, this should then be removed with care using the supplied microfibre cloths.

Step 2 – Poorboys natty’s paste wax

As with most waxes, apply as thinly as possible using the supplied yellow foam applicator pad and left to cure onto the paintwork for 10 – 15 minutes and the removed carefully using one of the supplied microfibre towels.

Step 3 – Poorboys QD+ Quick Detailer Plus

Use the QD+ to mist over the bodywork a panel at a time and immediately wipr down to spread a thin, even layer over the panel using one of the supplied microfibre cloths and then remove the remaining film using one of the large microfibre towels to create a stunning shine.

Care instructions for microfibre and applicator pads

1. Wash after use in a washing machine at 40-60c using a liquid detergent (do not use powder, bleach or fabric softeners as these will clog and damage the microfibres) 
2. Tumble dry at a low heat setting or allow to dry naturally
3. Store dry in a dust-free area when not in use, plastic boxes with clip-close lids are best.