Buy online or by phone
call 0203 602 9880

Meguiars DA Microfibre Kit

More Views

Meguiars DA Microfibre Basics Kit

Be the first to review this product

Availability: In stock

£69.00

Price as configured: £69.00

Meguiars 5" DA Microfibre Finishing Disc - 2 Pack   +£0.00
Meguiars 5" DA Microfibre Cutting Disc - 2 Pack   +£0.00
Meguiars Detailer DA Microfibre Finishing Wax - 473ml   +£0.00
Meguiars DA Microfibre Correction Compound - 473ml   +£0.00

Price as configured: £69.00

Details

2011 marked a new beginning for the meguiars G220 releasing the new and improved G220v2, to follow this they promised something very different and a bit special, well after lots of tests and trials it's here, the Meguiars DA Microfibre System and coupled with their G220v2 it's something you've got to try! 

You don't need a G220v2 for this to work, it'll work with any Dual Action polisher but is not for use with a rotary as it just won't perform as well.

This kit contains...

1 x DA Microfibre Correction Compound
1 x DA Microfibre Finishing Wax
2 x DA Microfibre 5" Cutting Disk
2 x DA Microfibre 5" Finishing Disk

How to use;

Step 1 - Correction Compound & Cutting Disk

Start by attaching the cutting (maroon) microfibre pad to your DA polisher then prime the pad by placing 3 - 4 pea sized drops of correction compound on the pad, you'll then need to work the correction compound into the pad using your fingers to ensure an even coverage of the full pad, this will turn the pad pink.
Once you have fully covered the pad with an even coverage place another 2 - 3 drops of product on your pad, this will be the working compound.

Set your DA machine to 4800opm* (around speed 4 on most machines) and working on a 2' x 2' section apply 2 - 3 moderate pressure slow passes then repeat over the same section with 2 - 3 light pressure slow passes, then using a microfibre towel/cloth remove the residue.

*Please note that a lower speed is necessary for this process to work and high speed won't work, it may takea bit of getting used to!

Step 2 - Finishing Wax & Finishing Disk

Now swap pads to the finishing (black) microfibre pad and attach to your DA polisher then prime the pad by placing 3 - 4 pea sized drops of finishing wax on the pad, you'll then need to work the finishing wax into the pad using your fingers to ensure an even coverage of the full pad, this will turn the pad grey.
Once you have fully covered the pad with an even coverage place another 2 - 3 drops of product on your pad, this will be the working product.

Set your DA machine to 3800opm (speed 2-3 on most machines) and apply 2 - 3 light pressure slow passes, then using a microfibre towel/cloth to remove the residue, it is ok to wax the whole car at once and then remove residue if desired.

Pro tips;

Clean your microfibre pads frequently, generally after each section using a stiff brush or compressed air and once finished using the pad fully rinse off product to restore to a clean pad, dry off and store in a sealed box to keep dust and dirt off the face of the pad.

 

 

Additional Information

Suitable for paint colour N/A
Product Code N/A
Intended Purpose N/A
UPC N/A
Manufacturer Meguiars Detailer

Customer Reviews

Write Your Own Review

You're reviewing: Meguiars DA Microfibre Basics Kit